Skip to main content
MyTapWater.us

PWSID TX2050007

CITY OF TAFT

Community water system based in Taft, TX

Service area on file with EPA: San Patricio County. EPA's recorded service area can be incomplete for regional authorities. The cities and counties above are what the utility has filed with EPA; the utility may serve additional areas.

Population served
4,941
Source
Surface water
Status
Active

At a glance

4 above the safety limit, 1 detection to watch

Past 5 years: 8 health-based violations on file, all marked Resolved or Archived. See compliance history below.

Risk classification follows EPA's published values for safe drinking water, with caution and concern bands reviewed by a clinician. Past resolved violations do not influence this card. See methodology.

Lead service line inventory

No inventory data on file

We do not yet have this utility's published Lead Service Line Inventory on file. The EPA Lead and Copper Rule Improvements (LCRI) required every community water system to publish one by October 16, 2024 and to identify and replace any lead lines within 10 years. How lead enters drinking water.

Phase 1 coverage focuses on the largest NC utilities. Smaller systems will be added; in the meantime, ask your utility for their inventory or check their Consumer Confidence Report.

Lead and copper test results

The most recent measurement per contaminant from EPA's Lead and Copper Rule sampling.

Why only lead and copper, and not arsenic, nitrate, or others?

EPA's bulk SDWIS download is the only nationwide per-system sample data they publish, and it only includes the Lead and Copper Rule table. Values for other regulated contaminants (TTHMs, nitrate, arsenic, etc.) appear on this page only when they trigger a violation. For the full per-system contaminant suite, see the utility's annual Consumer Confidence Report (link further down the page).

Most recent measurements per contaminant (Lead and Copper Rule) . Sorted by risk: concern first, then caution, then unrated, then safe.
Contaminant Most recent Date Risk
PB90
0.00295 mg/L December 31, 2024 Caution

Data from EPA SDWIS (Lead and Copper Rule sample table) , last refreshed May 24, 2026.

PFAS and emerging contaminants

This system was tested 66 times under EPA's latest PFAS monitoring program; 3 of the 30 chemicals tested were detected.

What is this testing program?

EPA's fifth Unregulated Contaminant Monitoring Rule cycle (UCMR 5, 2023 to 2025) required every public water system serving over 3,300 people to test for 29 per- and polyfluoroalkyl substances (PFAS) plus lithium; 30 chemicals in total. Most recent detection per chemical shown below.

Most recent UCMR 5 detection per contaminant . Sorted by risk: concern first, then caution, then unrated, then safe.
Contaminant Most recent detection Date Risk
0.0541 mg/LOctober 20, 2025 Concern
35 ng/LAugust 12, 2025 No federal limit
3.3 ng/LAugust 12, 2025 No federal limit
Tested but not detected (27 contaminants)

EPA tested for these substances and every sample was below the minimum reporting level. Absence of detection does not mean true zero; it means below the laboratory's quantitation threshold.

Data from EPA UCMR 5 (Unregulated Contaminant Monitoring Rule) , last refreshed May 24, 2026.

Fluoride

Per CDC My Water's Fluoride

CITY OF TAFT adds fluoride to its drinking water.

CDC classifies a system as fluoridated when it adjusts fluoride to the recommended level, or when it buys water from a system that does. The U.S. Public Health Service recommends 0.7 mg/L for community water fluoridation.

Source: CDC My Water's Fluoride, listed under TAFT (San Patricio County). Verify on CDC's site .

Area context

San Patricio County, TX (2020 data)

Community water systems
16 of 18 add fluoride
Population on fluoridated water
62,831 of 67,780 (92.7%)

Texas statewide (2020 data)

Population on fluoridated water
19,743,163 of 27,818,869 (71.0%)
Community water systems adding fluoride
2,573 of 6,046

Data from CDC My Water's Fluoride (per-system status) , last refreshed May 19, 2026.

Data from CDC Water Fluoridation Reporting System (state and county aggregates) , last refreshed May 16, 2026.

Recorded contaminant measurements (from violations)

When this system exceeded a regulatory limit and EPA recorded the measured value, that value is shown here. These are not routine sample results: they are the values the violation was triggered on.

Measured values from recorded violations . Most recent first.
Period Contaminant Measured Federal MCL Status
January 1, 2022Tthm0.081MG/L0.08 MG/L Health-based
January 1, 2022Tthm0.081MG/L0.08 MG/L Health-based
January 1, 2022Tthm0.081MG/L0.08 MG/L Health-based
January 1, 2022Tthm0.081MG/L0.08 MG/L Health-based
October 1, 2021Tthm0.084MG/L0.08 MG/L Health-based
October 1, 2021Tthm0.084MG/L0.08 MG/L Health-based
October 1, 2021Tthm0.084MG/L0.08 MG/L Health-based
October 1, 2021Tthm0.084MG/L0.08 MG/L Health-based

Data from EPA SDWIS (violation records) , last refreshed May 24, 2026.

Compliance history

EPA-recorded violations against this system over the last 5 years.

How to read this section

Health-based violations are when a measured limit was exceeded; the measured concentration is shown alongside the EPA federal limit where SDWIS published it. Monitoring and reporting items are paperwork issues (missed sample dates, late filings) that do not themselves indicate unsafe water.

3 active health-based violations

EPA records 3 health-based violations that have not yet been resolved. An additional 8 health-based violations in the last 5 years are already resolved.

Health-based violations in the last 5 years
Period start Contaminant What happened Measured level Status
October 17, 2024 Lead and Copper Rule Revisions LSL Inventory Not reported Unaddressed
October 17, 2024 Lead and Copper Rule Revisions LSL Inventory Not reported Unaddressed
October 17, 2024 Lead and Copper Rule Revisions LSL Inventory Not reported Unaddressed
January 1, 2022 Tthm Maximum Contaminant Level Violation, Average
0.081 MG/L
MCL 0.080 MG/L
Resolved
January 1, 2022 Tthm Maximum Contaminant Level Violation, Average
0.081 MG/L
MCL 0.080 MG/L
Resolved
January 1, 2022 Tthm Maximum Contaminant Level Violation, Average
0.081 MG/L
MCL 0.080 MG/L
Resolved
January 1, 2022 Tthm Maximum Contaminant Level Violation, Average
0.081 MG/L
MCL 0.080 MG/L
Resolved
October 1, 2021 Tthm Maximum Contaminant Level Violation, Average
0.084 MG/L
MCL 0.080 MG/L
Resolved
October 1, 2021 Tthm Maximum Contaminant Level Violation, Average
0.084 MG/L
MCL 0.080 MG/L
Resolved
October 1, 2021 Tthm Maximum Contaminant Level Violation, Average
0.084 MG/L
MCL 0.080 MG/L
Resolved
October 1, 2021 Tthm Maximum Contaminant Level Violation, Average
0.084 MG/L
MCL 0.080 MG/L
Resolved
21 monitoring and reporting item s (paperwork) , 4 still open · these are not health risks
Monitoring and reporting items in the last 5 years
Period start Relates to Item Status
August 24, 2025 Public Notice Public Notification Violation for NPDWR Violation Resolved
August 24, 2025 Public Notice Public Notification Violation for NPDWR Violation Resolved
May 1, 2025 Public Notice Public Notification Violation for NPDWR Violation Resolved
May 1, 2025 Public Notice Public Notification Violation for NPDWR Violation Resolved
October 17, 2024 Lead and Copper Rule Revisions LSL Reporting Unaddressed
October 17, 2024 Lead and Copper Rule Revisions LSL Reporting Unaddressed
October 17, 2024 Lead and Copper Rule Revisions LSL Reporting Unaddressed
August 1, 2024 Public Notice Public Notification Violation for NPDWR Violation Unaddressed
July 1, 2024 Lead and Copper Rule Follow-up Or Routine LCR Tap M/R Resolved
July 1, 2024 Lead and Copper Rule Follow-up Or Routine LCR Tap M/R Resolved
July 1, 2024 Lead and Copper Rule Follow-up Or Routine LCR Tap M/R Resolved
October 1, 2023 Lead and Copper Rule Follow-up Or Routine LCR Tap M/R Resolved
October 1, 2023 Lead and Copper Rule Follow-up Or Routine LCR Tap M/R Resolved
October 1, 2023 Lead and Copper Rule Follow-up Or Routine LCR Tap M/R Resolved
October 1, 2023 Lead and Copper Rule Follow-up Or Routine LCR Tap M/R Resolved
July 1, 2023 Revised Total Coliform Rule Monitoring, Routine (RTCR) Resolved
July 1, 2023 Revised Total Coliform Rule Monitoring, Routine (RTCR) Resolved
July 1, 2023 Revised Total Coliform Rule Monitoring, Routine (RTCR) Resolved
July 1, 2022 Consumer Confidence Rule Consumer Confidence Report Inadequate Reporting Resolved
July 1, 2022 Consumer Confidence Rule Consumer Confidence Report Inadequate Reporting Resolved
July 1, 2022 Consumer Confidence Rule Consumer Confidence Report Inadequate Reporting Resolved
2 older violation s (5-10 years ago) · all paperwork (monitoring/reporting), none health-based , all resolved
Violations 5-10 years ago (2 total)
Period start Relates to Item Measured level Status
July 1, 2019 Consumer Confidence Rule Consumer Confidence Report Inadequate Reporting Resolved
July 1, 2019 Consumer Confidence Rule Consumer Confidence Report Inadequate Reporting Resolved

Data from EPA SDWIS (violation records) , last refreshed May 24, 2026.

Where to see every contaminant this utility tested for

EPA's bulk SDWIS dataset gives MyTapWater.us per-system measured values for lead and copper, plus violation records for everything else. To see every regulated contaminant this utility tested for in the past year (TTHMs, HAA5, nitrate, arsenic, fluoride, chromium, etc.) with measured values, read the utility's Consumer Confidence Report (CCR).

Every community water system is required by EPA to publish a CCR annually, by July 1, listing every contaminant they sampled, the measured value, the federal limit, and any health-based exceedances. Most utilities post the report online; some mail it with your bill.

How to find CITY OF TAFT's CCR:

Compare nearby utilities by population served.

Contact this utility

Public administrative contact information for this water system, as filed with the EPA. Use this to ask about your service line, request your home's lead status, or report a water quality issue.

Administrator
POWELL, RANDY
Phone
361-528-3512
Mailing address
PO BOX 416
TAFT, TX 78390-0416

Where this page's data comes from

Bundle released 2026-Q2, regenerated May 24, 2026. Each section above also shows its own source date so you can tell at a glance how fresh that part of the page is.

Every value on this page is cross-verified before publication; read our methodology for the verification steps and corrections process.