Skip to main content
MyTapWater.us

PWSID TX1110007

ACTON MUD

Community water system based in Granbury, TX

Service area on file with EPA: Hood County. EPA's recorded service area can be incomplete for regional authorities. The cities and counties above are what the utility has filed with EPA; the utility may serve additional areas.

Population served
20k
Source
Surface water
Status
Active

At a glance

1 above the safety limit, 1 detection to watch

Risk classification follows EPA's published values for safe drinking water, with caution and concern bands reviewed by a clinician. Past resolved violations do not influence this card. See methodology.

Lead service line inventory

Utility reports no confirmed lead service lines

ACTON MUD reports 0 confirmed lead service lines, 9,071 non-lead, 0 unknown (total 9,071) in the EPA SDWIS service line inventory (2026Q1).

  • 0 confirmed lead service lines
  • 0 galvanized requiring replacement (LCRI treats these as lead)
  • 0 unknown (0.0% of total)
  • 9,071 confirmed non-lead (100.0%)
  • 9,071 total service lines in the system
What to do if your service line might be lead
  1. Ask your utility to check the service-line classification for your specific address. Many utilities provide a public address-lookup tool linked from the inventory page.
  2. Get on the replacement queue. Under the LCRI, utilities must replace all lead and galvanized-requiring- replacement lines within 10 years (clock generally starts November 2027). Some prioritize requests.
  3. Until the line is replaced: flush the tap 30 seconds after long stagnation, use cold water for drinking and cooking, and consider an NSF/ANSI 53 lead-rated tap filter.
  4. Talk to your clinician about a blood lead test for anyone in the home, especially a pregnant person or a child under 6. Lead in drinking water guide.

Inventory data sourced from ACTON MUD ( retrieved May 24, 2026 ; curator confidence: high ). Confirmed against the original source automatically each month; see methodology.

Lead and copper test results

The most recent measurement per contaminant from EPA's Lead and Copper Rule sampling.

Why only lead and copper, and not arsenic, nitrate, or others?

EPA's bulk SDWIS download is the only nationwide per-system sample data they publish, and it only includes the Lead and Copper Rule table. Values for other regulated contaminants (TTHMs, nitrate, arsenic, etc.) appear on this page only when they trigger a violation. For the full per-system contaminant suite, see the utility's annual Consumer Confidence Report (link further down the page).

Most recent measurements per contaminant (Lead and Copper Rule) . Sorted by risk: concern first, then caution, then unrated, then safe.
Contaminant Most recent Date Risk
PB90
0.00225 mg/L December 31, 2024 Caution

Data from EPA SDWIS (Lead and Copper Rule sample table) , last refreshed May 24, 2026.

PFAS and emerging contaminants

This system was tested 1,260 times under EPA's latest PFAS monitoring program; 1 of the 30 chemicals tested was detected.

What is this testing program?

EPA's fifth Unregulated Contaminant Monitoring Rule cycle (UCMR 5, 2023 to 2025) required every public water system serving over 3,300 people to test for 29 per- and polyfluoroalkyl substances (PFAS) plus lithium; 30 chemicals in total. Most recent detection per chemical shown below.

Most recent UCMR 5 detection per contaminant . Sorted by risk: concern first, then caution, then unrated, then safe.
Contaminant Most recent detection Date Risk
0.0607 mg/LMay 12, 2025 Concern
Tested but not detected (29 contaminants)

EPA tested for these substances and every sample was below the minimum reporting level. Absence of detection does not mean true zero; it means below the laboratory's quantitation threshold.

Data from EPA UCMR 5 (Unregulated Contaminant Monitoring Rule) , last refreshed May 24, 2026.

Fluoride

Per CDC My Water's Fluoride

ACTON MUD does not add fluoride to its drinking water.

This system has not reported adding fluoride to its water on CDC's My Water's Fluoride listing. Natural fluoride may still be present at trace levels from the source water; the utility's annual water quality report has the latest measured concentration.

Source: CDC My Water's Fluoride, listed under ACTON MUNICIPAL UTILITY DISTRICT (Hood County). Verify on CDC's site .

Area context

Hood County, TX (2020 data)

Community water systems
12 of 69 add fluoride
Population on fluoridated water
5,514 of 58,378 (9.4%)

Texas statewide (2020 data)

Population on fluoridated water
19,743,163 of 27,818,869 (71.0%)
Community water systems adding fluoride
2,573 of 6,046

Data from CDC My Water's Fluoride (per-system status) , last refreshed May 19, 2026.

Data from CDC Water Fluoridation Reporting System (state and county aggregates) , last refreshed May 16, 2026.

Compliance history

EPA-recorded violations against this system over the last 5 years.

How to read this section

Health-based violations are when a measured limit was exceeded; the measured concentration is shown alongside the EPA federal limit where SDWIS published it. Monitoring and reporting items are paperwork issues (missed sample dates, late filings) that do not themselves indicate unsafe water.

Clean record

No violations on file for this system in the last 5 years.

76 older violation s (5-10 years ago) · 8 health-based, 68 paperwork , all resolved
Violations 5-10 years ago (76 total)
Period start Relates to Item Measured level Status
January 1, 2021 Oxamyl Monitoring, Regular Resolved
January 1, 2021 Aldicarb Sulfone Monitoring, Regular Resolved
January 1, 2021 Oxamyl Monitoring, Regular Resolved
January 1, 2021 1,2-Dibromo-3-Chloropropane Monitoring, Regular Resolved
January 1, 2021 Dinoseb Monitoring, Regular Resolved
January 1, 2021 Aldicarb Monitoring, Regular Resolved
January 1, 2021 Fluoride Monitoring, Regular Resolved
January 1, 2021 Ethylene Dibromide Monitoring, Regular Resolved
January 1, 2021 1,2-Dibromo-3-Chloropropane Monitoring, Regular Resolved
January 1, 2021 Cyanide Monitoring, Regular Resolved
January 1, 2021 Aldicarb Monitoring, Regular Resolved
January 1, 2021 Cyanide Monitoring, Regular Resolved
January 1, 2021 Aldicarb Sulfone Monitoring, Regular Resolved
January 1, 2021 Carbofuran Monitoring, Regular Resolved
January 1, 2021 2,4,5-Tp Monitoring, Regular Resolved
January 1, 2021 Fluoride Monitoring, Regular Resolved
January 1, 2021 Picloram Monitoring, Regular Resolved
January 1, 2021 2,4,5-Tp Monitoring, Regular Resolved
January 1, 2021 Dalapon Monitoring, Regular Resolved
January 1, 2021 Dalapon Monitoring, Regular Resolved
January 1, 2021 Aldicarb Sulfoxide Monitoring, Regular Resolved
January 1, 2021 Dinoseb Monitoring, Regular Resolved
January 1, 2021 Aldicarb Sulfoxide Monitoring, Regular Resolved
January 1, 2021 2,4-D Monitoring, Regular Resolved
January 1, 2021 Ethylene Dibromide Monitoring, Regular Resolved
January 1, 2021 2,4-D Monitoring, Regular Resolved
January 1, 2021 Picloram Monitoring, Regular Resolved
January 1, 2021 Carbofuran Monitoring, Regular Resolved
January 1, 2020 Antimony, Total Monitoring, Regular Resolved
January 1, 2020 Hexachlorocyclopentadiene Monitoring, Regular Resolved
January 1, 2020 Di(2-Ethylhexyl) Phthalate Monitoring, Regular Resolved
January 1, 2020 Pentachlorophenol Monitoring, Regular Resolved
January 1, 2020 Lasso Monitoring, Regular Resolved
January 1, 2020 Di(2-Ethylhexyl) Adipate Monitoring, Regular Resolved
January 1, 2020 Thallium, Total Monitoring, Regular Resolved
January 1, 2020 Beryllium, Total Monitoring, Regular Resolved
January 1, 2020 Cadmium Monitoring, Regular Resolved
January 1, 2020 Methoxychlor Monitoring, Regular Resolved
January 1, 2020 Chromium Monitoring, Regular Resolved
January 1, 2020 Chlordane Monitoring, Regular Resolved
January 1, 2020 Barium Monitoring, Regular Resolved
January 1, 2020 Barium Monitoring, Regular Resolved
January 1, 2020 Arsenic Monitoring, Regular Resolved
January 1, 2020 Simazine Monitoring, Regular Resolved
January 1, 2020 Antimony, Total Monitoring, Regular Resolved
January 1, 2020 Mercury Monitoring, Regular Resolved
January 1, 2020 Bhc-Gamma Monitoring, Regular Resolved
January 1, 2020 Hexachlorobenzene Monitoring, Regular Resolved
January 1, 2020 Arsenic Monitoring, Regular Resolved
January 1, 2020 Endrin Monitoring, Regular Resolved
January 1, 2020 Benzo(a)Pyrene Monitoring, Regular Resolved
January 1, 2020 Cadmium Monitoring, Regular Resolved
January 1, 2020 Selenium Monitoring, Regular Resolved
January 1, 2020 Beryllium, Total Monitoring, Regular Resolved
January 1, 2020 Thallium, Total Monitoring, Regular Resolved
January 1, 2020 Toxaphene Monitoring, Regular Resolved
January 1, 2020 Atrazine Monitoring, Regular Resolved
January 1, 2020 Mercury Monitoring, Regular Resolved
January 1, 2020 Heptachlor Epoxide Monitoring, Regular Resolved
January 1, 2020 Heptachlor Monitoring, Regular Resolved
January 1, 2020 Selenium Monitoring, Regular Resolved
January 1, 2020 Chromium Monitoring, Regular Resolved
April 30, 2018 Public Notice Public Notification Violation without NPDWR Violation Resolved
April 30, 2018 Public Notice Public Notification Violation without NPDWR Violation Resolved
April 30, 2018 Public Notice Public Notification Violation without NPDWR Violation Resolved
April 30, 2018 Public Notice Public Notification Violation without NPDWR Violation Resolved
December 30, 2016 Lead and Copper Rule Lead Consumer Notice Resolved
December 30, 2016 Lead and Copper Rule Lead Consumer Notice Resolved
October 1, 2016 Cadmium Maximum Contaminant Level Violation, Average
0.0060 MG/L
MCL 0.0050 MG/L
Resolved
October 1, 2016 Cadmium Maximum Contaminant Level Violation, Average
0.0060 MG/L
MCL 0.0050 MG/L
Resolved
October 1, 2016 Cadmium Maximum Contaminant Level Violation, Average
0.0060 MG/L
MCL 0.0050 MG/L
Resolved
October 1, 2016 Cadmium Maximum Contaminant Level Violation, Average
0.0060 MG/L
MCL 0.0050 MG/L
Resolved
July 1, 2016 Cadmium Maximum Contaminant Level Violation, Average
0.0080 MG/L
MCL 0.0050 MG/L
Resolved
July 1, 2016 Cadmium Maximum Contaminant Level Violation, Average
0.0080 MG/L
MCL 0.0050 MG/L
Resolved
July 1, 2016 Cadmium Maximum Contaminant Level Violation, Average
0.0080 MG/L
MCL 0.0050 MG/L
Resolved
July 1, 2016 Cadmium Maximum Contaminant Level Violation, Average
0.0080 MG/L
MCL 0.0050 MG/L
Resolved

Data from EPA SDWIS (violation records) , last refreshed May 24, 2026.

Where to see every contaminant this utility tested for

EPA's bulk SDWIS dataset gives MyTapWater.us per-system measured values for lead and copper, plus violation records for everything else. To see every regulated contaminant this utility tested for in the past year (TTHMs, HAA5, nitrate, arsenic, fluoride, chromium, etc.) with measured values, read the utility's Consumer Confidence Report (CCR).

Every community water system is required by EPA to publish a CCR annually, by July 1, listing every contaminant they sampled, the measured value, the federal limit, and any health-based exceedances. Most utilities post the report online; some mail it with your bill.

How to find ACTON MUD's CCR:

Compare nearby utilities by population served.

Contact this utility

Public administrative contact information for this water system, as filed with the EPA. Use this to ask about your service line, request your home's lead status, or report a water quality issue.

Administrator
LEWIS, RAY
Phone
817-326-4720
Mailing address
6420 LUSK BRANCH CT
GRANBURY, TX 76049-2035

Where this page's data comes from

Bundle released 2026-Q2, regenerated May 24, 2026. Each section above also shows its own source date so you can tell at a glance how fresh that part of the page is.

Every value on this page is cross-verified before publication; read our methodology for the verification steps and corrections process.