Skip to main content
MyTapWater.us

PWSID IL1090380

KILJORDAN MEADOWS

Community water system based in Macomb, IL

Service area on file with EPA: Macomb · McDonough County. EPA's recorded service area can be incomplete for regional authorities. The cities and counties above are what the utility has filed with EPA; the utility may serve additional areas.

Population served
282
Source
Surface water
Status
Active

At a glance

Recent tests are below federal safety limits

Risk classification follows EPA's published values for safe drinking water, with caution and concern bands reviewed by a clinician. Past resolved violations do not influence this card. See methodology.

Lead service line inventory

Utility reports no confirmed lead service lines

Kiljordan Meadows Manufactured Home Community (PWS) reports 0 confirmed lead service lines, 300 non-lead, 0 unknown (total 300) in its Illinois EPA Service Line Material Inventory (reporting year 2022).

  • 0 confirmed lead service lines
  • 0 galvanized requiring replacement (LCRI treats these as lead)
  • 0 unknown (0.0% of total)
  • 300 confirmed non-lead (100.0%)
  • 300 total service lines in the system
What to do if your service line might be lead
  1. Ask your utility to check the service-line classification for your specific address. Many utilities provide a public address-lookup tool linked from the inventory page.
  2. Get on the replacement queue. Under the LCRI, utilities must replace all lead and galvanized-requiring- replacement lines within 10 years (clock generally starts November 2027). Some prioritize requests.
  3. Until the line is replaced: flush the tap 30 seconds after long stagnation, use cold water for drinking and cooking, and consider an NSF/ANSI 53 lead-rated tap filter.
  4. Talk to your clinician about a blood lead test for anyone in the home, especially a pregnant person or a child under 6. Lead in drinking water guide.

Inventory data sourced from Kiljordan Meadows Manufactured Home Community (PWS) (reporting date March 23, 2023; retrieved May 24, 2026 ; curator confidence: high ). Confirmed against the original source automatically each month; see methodology.

Lead and copper test results

The most recent measurement per contaminant from EPA's Lead and Copper Rule sampling.

Why only lead and copper, and not arsenic, nitrate, or others?

EPA's bulk SDWIS download is the only nationwide per-system sample data they publish, and it only includes the Lead and Copper Rule table. Values for other regulated contaminants (TTHMs, nitrate, arsenic, etc.) appear on this page only when they trigger a violation. For the full per-system contaminant suite, see the utility's annual Consumer Confidence Report (link further down the page).

Most recent measurements per contaminant (Lead and Copper Rule) . Sorted by risk: concern first, then caution, then unrated, then safe.
Contaminant Most recent Date Risk
PB90
0 mg/L December 31, 2025 Below regulatory thresholds

Data from EPA SDWIS (Lead and Copper Rule sample table) , last refreshed May 24, 2026.

Fluoride

We don't yet have this utility's specific fluoridation status from CDC's My Water's Fluoride listing. The figures below describe the broader area, not KILJORDAN MEADOWS itself.

Area context

McDonough County, IL (2020 data)

Community water systems
10 of 13 add fluoride
Population on fluoridated water
21,652 of 22,471 (96.4%)

Illinois statewide (2020 data)

Population on fluoridated water
11,457,094 of 11,640,823 (98.4%)
Community water systems adding fluoride
1,639 of 1,815

Look up your specific utility

Illinois shares per-system data on CDC's My Water's Fluoride site. Search by water system to see whether KILJORDAN MEADOWS adds fluoride.

CDC My Water's Fluoride: search by water system

Data from CDC Water Fluoridation Reporting System (state and county aggregates) , last refreshed May 16, 2026.

Compliance history

EPA-recorded violations against this system over the last 5 years.

How to read this section

Health-based violations are when a measured limit was exceeded; the measured concentration is shown alongside the EPA federal limit where SDWIS published it. Monitoring and reporting items are paperwork issues (missed sample dates, late filings) that do not themselves indicate unsafe water.

Clean record

No violations on file for this system in the last 5 years.

Data from EPA SDWIS (violation records) , last refreshed May 24, 2026.

Where to see every contaminant this utility tested for

EPA's bulk SDWIS dataset gives MyTapWater.us per-system measured values for lead and copper, plus violation records for everything else. To see every regulated contaminant this utility tested for in the past year (TTHMs, HAA5, nitrate, arsenic, fluoride, chromium, etc.) with measured values, read the utility's Consumer Confidence Report (CCR).

Every community water system is required by EPA to publish a CCR annually, by July 1, listing every contaminant they sampled, the measured value, the federal limit, and any health-based exceedances. Most utilities post the report online; some mail it with your bill.

How to find KILJORDAN MEADOWS's CCR:

Compare nearby utilities by population served.

Contact this utility

Public administrative contact information for this water system, as filed with the EPA. Use this to ask about your service line, request your home's lead status, or report a water quality issue.

Administrator
LEVERTON, STEPHANIE
Phone
309-837-2883
Email
sleverton@inspirecommunities.com
Mailing address
1605 E Jackson St
MACOMB, IL 61455

Where this page's data comes from

Bundle released 2026-Q2, regenerated May 24, 2026. Each section above also shows its own source date so you can tell at a glance how fresh that part of the page is.

Every value on this page is cross-verified before publication; read our methodology for the verification steps and corrections process.