Skip to main content
MyTapWater.us

PWSID CA2400335

OLIVARES FARMS WATER SYSTEM

Non-transient non-community based in Delhi, CA

Service area on file with EPA: Merced County. EPA's recorded service area can be incomplete for regional authorities. The cities and counties above are what the utility has filed with EPA; the utility may serve additional areas.

Population served
28
Source
Groundwater
Status
Active

At a glance

Recent tests are below federal safety limits

Past 5 years: 17 health-based violations on file, all marked Resolved or Archived. See compliance history below.

Risk classification follows EPA's published values for safe drinking water, with caution and concern bands reviewed by a clinician. Past resolved violations do not influence this card. See methodology.

Lead service line inventory

Utility reports no confirmed lead service lines

OLIVARES FARMS WATER SYSTEM reports 0 confirmed lead service lines, 5 non-lead, 0 unknown (total 5) in the EPA SDWIS service line inventory (2026Q1).

  • 0 confirmed lead service lines
  • 0 galvanized requiring replacement (LCRI treats these as lead)
  • 0 unknown (0.0% of total)
  • 5 confirmed non-lead (100.0%)
  • 5 total service lines in the system
What to do if your service line might be lead
  1. Ask your utility to check the service-line classification for your specific address. Many utilities provide a public address-lookup tool linked from the inventory page.
  2. Get on the replacement queue. Under the LCRI, utilities must replace all lead and galvanized-requiring- replacement lines within 10 years (clock generally starts November 2027). Some prioritize requests.
  3. Until the line is replaced: flush the tap 30 seconds after long stagnation, use cold water for drinking and cooking, and consider an NSF/ANSI 53 lead-rated tap filter.
  4. Talk to your clinician about a blood lead test for anyone in the home, especially a pregnant person or a child under 6. Lead in drinking water guide.

Inventory data sourced from OLIVARES FARMS WATER SYSTEM ( retrieved May 24, 2026 ; curator confidence: high ). Confirmed against the original source automatically each month; see methodology.

Lead and copper test results

The most recent measurement per contaminant from EPA's Lead and Copper Rule sampling.

Why only lead and copper, and not arsenic, nitrate, or others?

EPA's bulk SDWIS download is the only nationwide per-system sample data they publish, and it only includes the Lead and Copper Rule table. Values for other regulated contaminants (TTHMs, nitrate, arsenic, etc.) appear on this page only when they trigger a violation. For the full per-system contaminant suite, see the utility's annual Consumer Confidence Report (link further down the page).

Most recent measurements per contaminant (Lead and Copper Rule) . Sorted by risk: concern first, then caution, then unrated, then safe.
Contaminant Most recent Date Risk
PB90
0 mg/L December 31, 2024 Below regulatory thresholds

Data from EPA SDWIS (Lead and Copper Rule sample table) , last refreshed May 24, 2026.

Fluoride

We don't yet have this utility's specific fluoridation status from CDC's My Water's Fluoride listing. The figures below describe the broader area, not OLIVARES FARMS WATER SYSTEM itself.

Area context

Merced County, CA (2020 data)

Community water systems
2 of 24 add fluoride
Population on fluoridated water
123,797 of 215,506 (57.4%)

California statewide (2020 data)

Population on fluoridated water
21,879,582 of 38,051,212 (57.5%)
Community water systems adding fluoride
417 of 3,057

Look up your specific utility

California shares per-system data on CDC's My Water's Fluoride site. Search by water system to see whether OLIVARES FARMS WATER SYSTEM adds fluoride.

CDC My Water's Fluoride: search by water system

Data from CDC Water Fluoridation Reporting System (state and county aggregates) , last refreshed May 16, 2026.

Recorded contaminant measurements (from violations)

When this system exceeded a regulatory limit and EPA recorded the measured value, that value is shown here. These are not routine sample results: they are the values the violation was triggered on.

Measured values from recorded violations . Most recent first.
Period Contaminant Measured Federal MCL Status
October 1, 2025Arsenic0.06MG/L0.01 MG/L Health-based
July 1, 2025Arsenic0.0615MG/L0.01 MG/L Health-based
April 1, 2025Arsenic0.062MG/L0.01 MG/L Health-based
January 1, 2025Arsenic0.0603MG/L0.01 MG/L Health-based
October 1, 2024Arsenic0.0602MG/L0.01 MG/L Health-based
July 1, 2024Arsenic0.0585MG/L0.01 MG/L Health-based
April 1, 2024Arsenic0.057MG/L0.01 MG/L Health-based
January 1, 2024Arsenic0.0565MG/L0.01 MG/L Health-based
October 1, 2023Arsenic0.057MG/L0.01 MG/L Health-based
July 1, 2023Arsenic0.058MG/L0.01 MG/L Health-based
April 1, 2023Arsenic0.059MG/L0.01 MG/L Health-based
January 1, 2023Arsenic0.061MG/L0.01 MG/L Health-based
October 1, 2022Arsenic0.059MG/L0.01 MG/L Health-based
July 1, 2022Arsenic61UG/L0.01 UG/L Health-based
April 1, 2022Arsenic0.06MG/L0.01 MG/L Health-based
January 1, 2022Arsenic61UG/L0.01 UG/L Health-based
July 1, 2021Arsenic62UG/L0.01 UG/L Health-based

Data from EPA SDWIS (violation records) , last refreshed May 24, 2026.

Compliance history

EPA-recorded violations against this system over the last 5 years.

How to read this section

Health-based violations are when a measured limit was exceeded; the measured concentration is shown alongside the EPA federal limit where SDWIS published it. Monitoring and reporting items are paperwork issues (missed sample dates, late filings) that do not themselves indicate unsafe water.

17 resolved health-based violations in the last 5 years

All 17 health-based violations in the last 5 years are marked Resolved or Archived. Past violations do not represent current water quality.

Health-based violations in the last 5 years
Period start Contaminant What happened Measured level Status
October 1, 2025 Arsenic Maximum Contaminant Level Violation, Average
0.060 MG/L
MCL 0.010 MG/L
Resolved
July 1, 2025 Arsenic Maximum Contaminant Level Violation, Average
0.061 MG/L
MCL 0.010 MG/L
Resolved
April 1, 2025 Arsenic Maximum Contaminant Level Violation, Average
0.062 MG/L
MCL 0.010 MG/L
Resolved
January 1, 2025 Arsenic Maximum Contaminant Level Violation, Average
0.060 MG/L
MCL 0.010 MG/L
Resolved
October 1, 2024 Arsenic Maximum Contaminant Level Violation, Average
0.060 MG/L
MCL 0.010 MG/L
Resolved
July 1, 2024 Arsenic Maximum Contaminant Level Violation, Average
0.059 MG/L
MCL 0.010 MG/L
Resolved
April 1, 2024 Arsenic Maximum Contaminant Level Violation, Average
0.057 MG/L
MCL 0.010 MG/L
Resolved
January 1, 2024 Arsenic Maximum Contaminant Level Violation, Average
0.057 MG/L
MCL 0.010 MG/L
Resolved
October 1, 2023 Arsenic Maximum Contaminant Level Violation, Average
0.057 MG/L
MCL 0.010 MG/L
Resolved
July 1, 2023 Arsenic Maximum Contaminant Level Violation, Average
0.058 MG/L
MCL 0.010 MG/L
Resolved
April 1, 2023 Arsenic Maximum Contaminant Level Violation, Average
0.059 MG/L
MCL 0.010 MG/L
Resolved
January 1, 2023 Arsenic Maximum Contaminant Level Violation, Average
0.061 MG/L
MCL 0.010 MG/L
Resolved
October 1, 2022 Arsenic Maximum Contaminant Level Violation, Average
0.059 MG/L
MCL 0.010 MG/L
Resolved
July 1, 2022 Arsenic Maximum Contaminant Level Violation, Average
61 UG/L
MCL 0.010 UG/L
Resolved
April 1, 2022 Arsenic Maximum Contaminant Level Violation, Average
0.060 MG/L
MCL 0.010 MG/L
Resolved
January 1, 2022 Arsenic Maximum Contaminant Level Violation, Average
61 UG/L
MCL 0.010 UG/L
Resolved
July 1, 2021 Arsenic Maximum Contaminant Level Violation, Average
62 UG/L
MCL 0.010 UG/L
Resolved
2 monitoring and reporting item s (paperwork) · these are not health risks
Monitoring and reporting items in the last 5 years
Period start Relates to Item Status
July 1, 2021 Consumer Confidence Rule Consumer Confidence Report Inadequate Reporting Resolved
July 1, 2021 Consumer Confidence Rule Consumer Confidence Report Inadequate Reporting Resolved
33 older violation s (5-10 years ago) · 31 health-based, 2 paperwork , all resolved
Violations 5-10 years ago (33 total)
Period start Relates to Item Measured level Status
April 1, 2021 Arsenic Maximum Contaminant Level Violation, Average
61 UG/L
MCL 0.010 UG/L
Resolved
January 1, 2021 Arsenic Maximum Contaminant Level Violation, Average
59 UG/L
MCL 0.010 UG/L
Resolved
October 1, 2020 Arsenic Maximum Contaminant Level Violation, Average
60 UG/L
MCL 0.010 UG/L
Resolved
July 1, 2020 Arsenic Maximum Contaminant Level Violation, Average
60 UG/L
MCL 0.010 UG/L
Resolved
April 1, 2020 Arsenic Maximum Contaminant Level Violation, Average
0.024 MG/L
MCL 0.010 MG/L
Resolved
January 1, 2020 Nitrate Maximum Contaminant Level Violation, Single Sample
31 MG/L
MCL 10 MG/L
Resolved
January 1, 2020 Nitrate Maximum Contaminant Level Violation, Single Sample
31 MG/L
MCL 10 MG/L
Resolved
October 1, 2019 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
October 1, 2019 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
July 1, 2019 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
July 1, 2019 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
April 1, 2019 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
April 1, 2019 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
January 1, 2019 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
January 1, 2019 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
October 1, 2018 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
October 1, 2018 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
July 1, 2018 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
July 1, 2018 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
April 1, 2018 Nitrate Maximum Contaminant Level Violation, Single Sample
29 MG/L
MCL 10 MG/L
Resolved
April 1, 2018 Nitrate Maximum Contaminant Level Violation, Single Sample
29 MG/L
MCL 10 MG/L
Resolved
January 1, 2018 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
January 1, 2018 Nitrate Maximum Contaminant Level Violation, Single Sample
28 MG/L
MCL 10 MG/L
Resolved
October 1, 2017 Nitrate Maximum Contaminant Level Violation, Single Sample
27 MG/L
MCL 10 MG/L
Resolved
October 1, 2017 Nitrate Maximum Contaminant Level Violation, Single Sample
27 MG/L
MCL 10 MG/L
Resolved
July 1, 2017 Nitrate Maximum Contaminant Level Violation, Single Sample
27 MG/L
MCL 10 MG/L
Resolved
July 1, 2017 Nitrate Maximum Contaminant Level Violation, Single Sample
27 MG/L
MCL 10 MG/L
Resolved
July 1, 2017 Consumer Confidence Rule Consumer Confidence Report Complete Failure to Report Resolved
July 1, 2017 Consumer Confidence Rule Consumer Confidence Report Complete Failure to Report Resolved
April 1, 2017 Nitrate Maximum Contaminant Level Violation, Single Sample
26 MG/L
MCL 10 MG/L
Resolved
April 1, 2017 Nitrate Maximum Contaminant Level Violation, Single Sample
26 MG/L
MCL 10 MG/L
Resolved
January 1, 2017 Nitrate Maximum Contaminant Level Violation, Single Sample
26 MG/L
MCL 10 MG/L
Resolved
January 1, 2017 Nitrate Maximum Contaminant Level Violation, Single Sample
26 MG/L
MCL 10 MG/L
Resolved

Data from EPA SDWIS (violation records) , last refreshed May 24, 2026.

Where to see every contaminant this utility tested for

EPA's bulk SDWIS dataset gives MyTapWater.us per-system measured values for lead and copper, plus violation records for everything else. To see every regulated contaminant this utility tested for in the past year (TTHMs, HAA5, nitrate, arsenic, fluoride, chromium, etc.) with measured values, read the utility's Consumer Confidence Report (CCR).

Every community water system is required by EPA to publish a CCR annually, by July 1, listing every contaminant they sampled, the measured value, the federal limit, and any health-based exceedances. Most utilities post the report online; some mail it with your bill.

How to find OLIVARES FARMS WATER SYSTEM's CCR:

Compare nearby utilities by population served.

Contact this utility

Public administrative contact information for this water system, as filed with the EPA. Use this to ask about your service line, request your home's lead status, or report a water quality issue.

Administrator
OLIVARES, DANIEL
Phone
209-505-2677
Email
olivaressons@gmail.com
Mailing address
P.O. Box 637
DELHI, CA 95315

Where this page's data comes from

Bundle released 2026-Q2, regenerated May 24, 2026. Each section above also shows its own source date so you can tell at a glance how fresh that part of the page is.

Every value on this page is cross-verified before publication; read our methodology for the verification steps and corrections process.