MyTapWater.us

PWSID CA0510009

BLUE LAKE SPRINGS MUT WTR

Community water system based in Arnold, CA

Service area on file with EPA: Calaveras County. EPA's recorded service area can be incomplete for regional authorities. The cities and counties above are what the utility has filed with EPA; the utility may serve additional areas.

Population served
4,841
Source
Surface water
Status
Active

At a glance

1 above the safety limit, 1 detection to watch

Risk classification follows EPA's published values for safe drinking water, with caution and concern bands reviewed by a clinician. Past resolved violations do not influence this card. See methodology.

Lead service line inventory

Utility reports no confirmed lead service lines

BLUE LAKE SPRINGS MUT WTR reports 0 confirmed lead service lines, 2,033 non-lead, 0 unknown (total 2,033) in the EPA SDWIS service line inventory (2026Q1).

  • 0 confirmed lead service lines
  • 0 galvanized requiring replacement (LCRI treats these as lead)
  • 0 unknown (0.0% of total)
  • 2,033 confirmed non-lead (100.0%)
  • 2,033 total service lines in the system
What to do if your service line might be lead
  1. Ask your utility to check the service-line classification for your specific address. Many utilities provide a public address-lookup tool linked from the inventory page.
  2. Get on the replacement queue. Under the LCRI, utilities must replace all lead and galvanized-requiring- replacement lines within 10 years (clock generally starts November 2027). Some prioritize requests.
  3. Until the line is replaced: flush the tap 30 seconds after long stagnation, use cold water for drinking and cooking, and consider an NSF/ANSI 53 lead-rated tap filter.
  4. Talk to your clinician about a blood lead test for anyone in the home, especially a pregnant person or a child under 6. Lead in drinking water guide.

Inventory data sourced from BLUE LAKE SPRINGS MUT WTR ( retrieved May 24, 2026 ; curator confidence: high ). Confirmed against the original source automatically each month; see methodology.

Lead and copper test results

The most recent measurement per contaminant from EPA's Lead and Copper Rule sampling.

Why only lead and copper, and not arsenic, nitrate, or others?

EPA's bulk SDWIS download is the only nationwide per-system sample data they publish, and it only includes the Lead and Copper Rule table. Values for other regulated contaminants (TTHMs, nitrate, arsenic, etc.) appear on this page only when they trigger a violation. For the full per-system contaminant suite, see the utility's annual Consumer Confidence Report (link further down the page).

Most recent measurements per contaminant (Lead and Copper Rule) . Sorted by risk: concern first, then caution, then unrated, then safe.
Contaminant Most recent Date Risk
Lead
PB90
 0.016 mg/L December 31, 2024 Concern

Data from EPA SDWIS (Lead and Copper Rule sample table) , last refreshed May 24, 2026.

PFAS and emerging contaminants

This system was tested 180 times under EPA's latest PFAS monitoring program; 1 of the 30 chemicals tested was detected.

What is this testing program?

EPA's fifth Unregulated Contaminant Monitoring Rule cycle (UCMR 5, 2023 to 2025) required every public water system serving over 3,300 people to test for 29 per- and polyfluoroalkyl substances (PFAS) plus lithium; 30 chemicals in total. Most recent detection per chemical shown below.

Most recent UCMR 5 detection per contaminant . Sorted by risk: concern first, then caution, then unrated, then safe.
Contaminant Most recent detection Date Risk
lithium
0.02 mg/LOctober 2, 2023 Caution
Tested but not detected (29 contaminants)

EPA tested for these substances and every sample was below the minimum reporting level. Absence of detection does not mean true zero; it means below the laboratory's quantitation threshold.

Data from EPA UCMR 5 (Unregulated Contaminant Monitoring Rule) , last refreshed May 24, 2026.

Fluoride

Per CDC My Water's Fluoride

BLUE LAKE SPRINGS MUT WTR does not add fluoride to its drinking water.

This system has not reported adding fluoride to its water on CDC's My Water's Fluoride listing. Natural fluoride may still be present at trace levels from the source water; the utility's annual water quality report has the latest measured concentration.

Source: CDC My Water's Fluoride, listed under Blue Lake Springs Mut Wtr (Calaveras County). Verify on CDC's site .

Area context

Calaveras County, CA (2020 data)

Community water systems
0 of 17 add fluoride
Population on fluoridated water
0 of 47,702 (0.0%)

California statewide (2020 data)

Population on fluoridated water
21,879,582 of 38,051,212 (57.5%)
Community water systems adding fluoride
417 of 3,057

Data from CDC My Water's Fluoride (per-system status) , last refreshed May 19, 2026.

Data from CDC Water Fluoridation Reporting System (state and county aggregates) , last refreshed May 16, 2026.

Compliance history

EPA-recorded violations against this system over the last 5 years.

How to read this section

Health-based violations are when a measured limit was exceeded; the measured concentration is shown alongside the EPA federal limit where SDWIS published it. Monitoring and reporting items are paperwork issues (missed sample dates, late filings) that do not themselves indicate unsafe water.

Clean record

No violations on file for this system in the last 5 years.

2 older violation s (5-10 years ago) · all paperwork (monitoring/reporting), none health-based , all resolved
Violations 5-10 years ago (2 total)
Period start Relates to Item Measured level Status
July 1, 2019 Consumer Confidence Rule Consumer Confidence Report Complete Failure to Report — Resolved
July 1, 2019 Consumer Confidence Rule Consumer Confidence Report Complete Failure to Report — Resolved

Data from EPA SDWIS (violation records) , last refreshed May 24, 2026.

Where to see every contaminant this utility tested for

EPA's bulk SDWIS dataset gives MyTapWater.us per-system measured values for lead and copper, plus violation records for everything else. To see every regulated contaminant this utility tested for in the past year (TTHMs, HAA5, nitrate, arsenic, fluoride, chromium, etc.) with measured values, read the utility's Consumer Confidence Report (CCR).

Every community water system is required by EPA to publish a CCR annually, by July 1, listing every contaminant they sampled, the measured value, the federal limit, and any health-based exceedances. Most utilities post the report online; some mail it with your bill.

How to find BLUE LAKE SPRINGS MUT WTR's CCR:

Other water systems in Calaveras County, CA

Compare nearby utilities by population served.

Contact this utility

Public administrative contact information for this water system, as filed with the EPA. Use this to ask about your service line, request your home's lead status, or report a water quality issue.

Administrator
MAYO, TYLER
Phone
209-795-7030
Email
TMAYO@BLSMWC.COM
Mailing address
P.O. BOX 2068
ARNOLD, CA 95223

Where this page's data comes from

Bundle released 2026-Q2, regenerated May 24, 2026. Each section above also shows its own source date so you can tell at a glance how fresh that part of the page is.

Every value on this page is cross-verified before publication; read our methodology for the verification steps and corrections process.